|
| A. The impression powder is non-toxic and biodegradeable, so is totally safe to use on the skin.
It's more common use is in dentistry and it has been thoroughly tested by this industry.
We have all the relevant health and safety data available on request. |
|
| A. The time taken for the mould to set varies with temperature of the air and the
water as well as the amount of water added. To extend the moulding time
you can add a little more water. Also, the colder the water the more time
you get before the mould sets. |
|
| A. To avoid bubbles tap the mould on a hard surface to knock them out of the casting
mix before it sets. You can also help release bubbles by gently wiggling
the bristle end of the paintbrush inside the mould right in the toes but
take care not to do any damage! This problem is particularly bad if you
are trying to cast baby hands. You need to give the filled mould a good
shake with your hand sealing the open top to try and release as many
bubbles caught in the fingers as possible. |
|
| A. No, it has to be broken up to peel it away from the plaster cast so it is not possible
to reuse the mould. |
|
A. The box frames are professionally hand-made and assembled by us.
They come in the following (glass) sizes:
- Desk 6" x 5"
- Square 8" x 8"
- Photo 10" x 8" (2 apertures)
- Medium 10" x 8" (1 aperture)
- Large photo 16" x 10"
The following finishes are available:
- Contemporary White
- Contemporary Light (Natural/Birch colour)
- Contemporary Dark (Brown)
- Contemporary Oak Effect
- Contemporary Black
The following mount colours are available:
|
|
|
